Question #1:

Can you use a car solenoid on a motor cycle?

I have a Kawasaki 550 ltd and i don't want to pay 50 bucks for a solenoid. tanks

Question #2:

Has this ever happened to you?

Lol, my mom just fell asleap on the couch. and like 2 hours later she woke back up. First thing said was You know what the car is not your it's not your name so just let the subject be. I was like wtf. I had an incident like that one day when my dad woke me up early in the moring for school he said what do you want for breakfast, i said a meatle bike. Lol? i know i was dreaming about me driving around on a motor cycle..Lol i wasnt in the right mind :P


Im just wondering if this happend to anybody else and if so tell me your story:P
Oh yeh and i dont have a drivers license yet im only 15 :P nore do i have a car. I guess my mom was dreaming about next year :]

Question #3:

Moped, Motor scooter, little motor cycle?

I'm thinking very seriously about getting a scooter. What's the difference in the various types. What brands are good. What other information should I know?

Question #4:

Please Help, I can't get my dirtbike started.?

I have tried almost everthing, but my dirt bike won't start. It's a Honda 70 CRF. I have already siphoned the old gas out and put new gas in, drained the oil and put new oil in, and tried pushing it down a hill then putting it in 1st. The only thing I am not sure about is that I might have put the wrong oil in it, I used 10w-40 castrol motor cycle.

BTW I accidently put 2 cycle oil in it, but i am pretty sure I drained and then flushed it all out.
Oh and I am trying to sell it because it is way to small.

Question #5:

How can i slow the RPM on an AC motor?

This is crazy but since i work under someone else i have no choice but to ask for help. My boss has a 3450 RPM, 60 cycle, 1 phase, 115/230 volts, 12.4/6.2 amps. Here's what we need to do other than buying a different motor. A pig will be roasted under a BBQ pit. I need to use this power-full motor and add some kind of extra belts to pulleys or something like that. We need to make this pig rotate at a much and i mean much slower rate so i cooks nice and thoroughly. My dead line is 6/26/09 If anyone has any brilliant ideas plz help.

Question #6:

How to seal a whole on a motor cycle seat?

I have a really small tear on my seat of my motorcycle, like that made of a toothpick, and I am afraid that in time, the tear will enlarge and ruin the seat all together.

So, is there a special product on the market that can repair this type of tear? Its a replica of leather, and you cant knit it or anything, so again, is there a type of product that can patch it up?

Question #7:

Does motor cycles has catalytic converters also?

I heard , the most important application of platinum is in automobiles as a catalytic converter, which allows the complete combustion of low concentrations of unburned hydrocarbon from the exhaust into carbon dioxide and water vapor. So is this mean motor cycles also has catalytic converters also?

Question #8:

Suzuki Gladius, 2009 Yamaha FZ6, or 2009 Yamaha FZ1?

I don't know what bike I should get...

The Suzuki Gladius
Click Here

2009 Yamaha FZ6
Click Here

2009 Yamaha FZ1
Click Here

Question #9:

i am look for a part for my motor cycle i tryed looking up a part number here is the number RS 2150 can u help?

Question #10:

I have two bound books The Motor Cycle magazine 1952 and 1953 how to sell?

I have 2 complete volumes of the motor cycle magazine for 1952 &1953 (bound good quality) want to sell but where also have other motor cycle mags from 1948 bound -covers separate wealth of info

Question #11:

is my go kart motor 2cycle or 4cycle? READ DETAILS!!?

i have a almost new hot wheels motor car, and it has a small howit motor on it but i don't know if i mix oil and gas or just oil. it has a separate place on the motor to put the oil just like a 4 cycle engine but the motor is really small like a weed eater motor. and it says o.h.v on the top of the motor.

Question #12:

have a 90 hp mercury ob boat motor. runs fine why i pump the ball dies soon after i stop?

i recently had my 2 cycle 90hp mercury outboard fixed now i am having fuel problems. was running great than died like i was out of gas, we pumped the ball and kept it running to get back. it seems to run just fine as long as were pumping the ball. i changed the ball and also pulled off as many fuel lines as i could and they seem to be clear of obstruction. please help
ive had good answers to my problem, however i still havnt been able to solve my problem. heres a few more details to see if i can get a better answer. my boat does have a built in fuel tank, i put a new ball and fuel lines from the place where it goes into the hull to the motor, and ive looked at the rest they seem ok, i know thats not enough. i was using the boat for several hours when i thought we were running out of gas, we pumped the ball and made it back to the dock. not knowing i had a problem i fueled up again the next weekend and went back out, it would start but not stay running. thats when i replaced the ball right at the lake. still not working i took it home replaced the gas lines i could with no results. it seems like it is sucking air but im not sure and im not sure what more to do. thank you for your answers and i will vote for best answer.

Question #13:

motor cycle insurance!?!?

i am 17, planning on getting a street bike next month or so, and was wondering wat insurance and coverage is the best for me....

Question #14:

Safety tips for a motor cycles...?

Can u give me some safety tipe when it comes to driving a motor cycle?

Question #15:

i want a motor cycle.which one should i prefer?

Question #16:

What is your favorite sound?

Mine would be the rumbling of a motor cycle right when it starts....or the sound of thunder....even tho it might scare some people :D what's your favorite sound?

Question #17:

Motorcycle license questions?

I live In East Texas. I just recently got my drivers permit. I also wanted a motor cycle permit and eventually licenses for both. We asked the people at the DPS and they said that a separate course was required for motor cycle licenses. I was wondering if there was the option for my dad to teach me so I wouldn't have to spend 4 weeks in the course.

If this is possible, Would you suggest taking the course or have my dad teaching me. I think the course wouldn't have much to offer, safety information wise, because I have my permit and I do CAT 4 road bike racing. Thanks.

Could you please leave links to where I could find the paperwork and information.

Question #18:

Why black people are so dominant when it comes to........?

Motor sports
Fencing
Shooting
Gymnastics
Softball
Rugby
Diving
Extreme Sports
Skateboard
BMX
Winter Sports
Hockey
Lacrosse
Sea sports
Horse Riding
Auto Sports
Cycling
Golf
Tennis
Soccer
Hockey
Table Tennis
Wrestling
MMA
Martial Arts
Moutain Bike
Pentathlon
Water Polo
Swimming

do i need to go on??
Black people rule lmao

Seriously you brag for NBA and Track, 2 sports only and where are you in 95% of sports??do u make 1% in all of them??lol
King Venus Serena and Tiger 3 out of the top 100 greats in their sports rest 97 whites
clap clap clap i applaud your black majesty lol
Track runners make less than 50 thousand per year but blacks do it still cause they can!
REST THEY CAN'T LOL
MLB???????only 9% is black and NFL is 50-50 lately yall get a grip!
NASCAR MOTOR SPORTS GOLF TENNIS SOCCER (IN EUROPE) AND RUGBY VERY HIGH PAID SPORTS AND BLACKS MAKE LESS THAN 5% IN ALL OF THEM

Question #19:

Home Air conditioning system not working question?

Heres what happens. Turn cool air on and it stays on for 5 mins then turns of. Stays off for 2-3 mins then tries to turn on again for like 20 seconds then turns off. repeats that cycle over and over.

The belt that goes from the motor to the blower is burning. Plus the motor is real hot. (outside unit works fine.) I know the belt needs replacing but that doesn't explain why it keeps turning on and off. Seems like it would just burn up the belt by staying on.

This is an old system at least 20-30 years old. Is it just the belt or is something else wrong with it??? thanks!

Question #20:

can you buy a custom belt for a motor cycle in other words if you build your own frame can you get the belt in?

a longer length my motor is belt driven from motor to wheel or is their a way to change it from belt to maybe long chain. like i said im building my own frame i need a few pointers. just on the belt part or if i should go with a chain. thanks





** Powered by Yahoo Answers